Left Side Engine

R&G RACING LEFT HAND SIDE ENGINE CASE COVER Yamaha MT-07 MOTO CAGE 2015-2017


R&G RACING LEFT HAND SIDE ENGINE CASE COVER Yamaha MT-07 MOTO CAGE 2015-2017
R&G RACING LEFT HAND SIDE ENGINE CASE COVER Yamaha MT-07 MOTO CAGE 2015-2017
R&G RACING LEFT HAND SIDE ENGINE CASE COVER Yamaha MT-07 MOTO CAGE 2015-2017
R&G RACING LEFT HAND SIDE ENGINE CASE COVER Yamaha MT-07 MOTO CAGE 2015-2017
R&G RACING LEFT HAND SIDE ENGINE CASE COVER Yamaha MT-07 MOTO CAGE 2015-2017
R&G RACING LEFT HAND SIDE ENGINE CASE COVER Yamaha MT-07 MOTO CAGE 2015-2017
R&G RACING LEFT HAND SIDE ENGINE CASE COVER Yamaha MT-07 MOTO CAGE 2015-2017

R&G RACING LEFT HAND SIDE ENGINE CASE COVER Yamaha MT-07 MOTO CAGE 2015-2017   R&G RACING LEFT HAND SIDE ENGINE CASE COVER Yamaha MT-07 MOTO CAGE 2015-2017

Yamaha MT-07 MOTO CAGE 2015>2017. R&G RACING BLACK LEFT HAND SIDE ENGINCE CASE COVER.

These exciting new Engine Case Covers have been developed in collaboration with selected race teams and crash tested within the R&G Racing Suzuki GSX-R Trophy. Crafted from 4mm polypropylene for strength, durability and good looks, they complement our crash protectors perfectly.

The covers simply bolt on over the original engine casing so no messing with glue or removing anything. Ever seen the prices of a new engine casing or the cost of removing debris from your engine?

Please make sure the engine is cold before proceeding with the fitting of the R&G cover. Remove the oil filler cap. Remove the four engine case bolts arrowed above. Hold the cover loosely over the case to help identify the correct ones. DO NOT REMOVE ALL OF THE CASE BOLTS.

If fitting to the MOTO CAGE, remove the OEM crash bar by removing the three mounting bolts to remove the bar and give access to the engine case bolts Offer up the R&G cover to the engine and carefully fit it over the engine casing. Ensure that the three R&G bolts are lined up with the holes in the engine casing, and then push on as far as it will go. Fit the bolts through the Engine Case Cover and into the engine case. With a 5mm Allen key tighten the bolts equally so that they pull the cover into place.

Finally use a torque wrench set at 10 Nm (7 Lb ft) to fully tighten. Refit the oil filler cap.

If fitting to the MOTO CAGE, re-fit the OEM crash bar and protector with the three mounting bolts as removed. It is suggested that you check the tightness of the mounting bolts on a regular basis i.

When cleaning or once a month. NOTE for the cleaning of this product you should only use a soft polishing cloth and a mild general cleaning agent. IF IN DOUBT DO NOT USE AS THEY COULD ALTER THE STRENGTH OF THE COVER.

R&G will accept no liability if the above procedure and torque settings are not followed. Extensively used around the world by thousands of road riders, trackday enthusiasts, the California Superbike School and the Chris Walker Race School (UK). R&G's entire range of Engine Case Covers (ECCs) have now been approved by the American Motorcycling Association (AMA) for use in any competition sanctioned by the Organisation. The AMA approval means that racers and teams running in events and championships under its banner now have the security of using a product that has been heavily tested, meeting and exceeding the specifications required for racing, as set down by the AMA for protection of engine cases in the event of a crash or drop. APPLICATION DETAILS ARE FOR UK SPECIFICATION MOTORCYCLES, IT IS THE BUYERS RESPONSIBILITY TO ENSURE THE SPECIFICATION OF THE MODEL FROM NON-UK COUNTRIES IS THE SAME AS A UK APPLICATION.

As with all aftermarket products sometimes small modifications can be required to fit some products. Photographs are for illustrative purposes only and shades may vary across computer monitors.

It is recommended that a competent mechanic fit these products. WE ARE ALWAYS HAPPY TO HELP YOU. SO WE WOULD APPRECIATE IT - IF ANY CUSTOMER WHO IS UN-HAPPY OR HAS RECEIVED A BROKEN / DAMAGED ITEM IN THE POST OR A LATE ITEM NOT ARRIVING TO PLEASE GET IN TOUCH WITH US BEFORE THEY LEAVE THEIR FEEDBACK. A note to our customers- we do run a very busy retail showroom & a motorcycle training school which is open 7 days a week.

If however your order is late - please don't hesitate in contacting us. International Buyers - Please Note. We cannot estimate when these charges will be applied, how much they will come to if applied and we regret that we cannot pay these charges. Please always read the instructions provided with the product before using/fitting. DIRCT accepts no liability for inaccuracies or misstatements about products by manufacturers or other third parties.

This does not affect your statutory rights. This item is in the category "Vehicle Parts & Accessories\Motorcycle & Scooter Parts & Accessories\Other Motorcycle & Scooter Parts & Accessories".

dirct" and is located in this country: GB. This item can be shipped to United Kingdom.

  1. Brand: R&G Racing
  2. Classic Motorcycle Part: No
  3. Bundle Listing: No
  4. Intended Use: Modification/Enhancement
  5. Colour: Black


R&G RACING LEFT HAND SIDE ENGINE CASE COVER Yamaha MT-07 MOTO CAGE 2015-2017   R&G RACING LEFT HAND SIDE ENGINE CASE COVER Yamaha MT-07 MOTO CAGE 2015-2017