Left hand side R&G Engine Case Cover. Fits the Yamaha MT-10 2018 2019 2020 models. In this kit there should be: 1x Engine Case Cover.3x M6 x 45mm long Button Head Bolts. PLEASE READ THESE INSTRUCTIONS FULLY BEFORE STARTING Please make sure the engine is cold before proceeding with the fitting of the R&G cover. To fit the R&G engine case cover remove the three M6 engine case bolts in the positions arrowed above. Hold the cover loosely over the case to help identify the correct ones. DO NOT REMOVE ALL OF THE CASE BOLTS. Fit the three spacers into the three holes in the engine case cover (these should be a tight fit to secure in position while fitting, once tighten they will remain in position).
Offer up the R&G cover to the engine and carefully fit it over the casing. Ensure that the three R&G bolts are lined up with the holes in the engine casing, and then push on as far as it will go. Please note the bolts marked with a star in the diagram require washers. Fit the bolts through the Engine Case Cover and into the engine case.
These exciting new engine case Covers have been developed in collaboration with selected race teams and crash tested within the R&G Racing Suzuki GSX-R Trophy. Crafted from 4mm polypropylene for strength, durability and good looks. They compliment our crash protectors perfectly.
The covers simply bolt on over the original engine casing. So no messing with glue or removing anything. Slimline for maximum ground clearance, ultra lightweight, matt finish and protecting one of the most vulnerable parts of the machine. Ever seen the prices of a new engine casing or the cost of removing debris from your engine?Extensively used around the world by thousands of road riders, trackday enthusiasts, the California Superbike School and the Chris Walker Race School (UK). R&G's entire range of Engine Case Covers (ECCs) and Engine Case Cover Kits (KECs) have been approved by the British Superbike Championship (BSB) and the American Motorcycling Association (AMA) for use in any competition sanctioned by the Organisations.
This approval means that racers and teams running in events and championships under those banners now have the security of using a product that has been heavily tested, meeting and exceeding the specifications required for racing, as set down by the racing authorities for protection of engine cases in the event of a crash. APPLICATION DETAILS ARE FOR UK SPECIFICATION MOTORCYCLES, IT IS THE BUYERS RESPONSIBILITY TO ENSURE THE SPECIFICATION OF THE MODEL FROM NON-UK COUNTRIES IS THE SAME AS A UK APPLICATION As with all aftermarket products sometimes small modifications can be required to fit some products. Photographs are for illustrative purposes only and shades may vary across computer monitors. It is recommended that a competent mechanic fit these products. We cannot estimate when these charges will be applied, how much they will come to if applied and we regret that we cannot pay these charges.Please always read the instructions provided with the product before using/fitting. DIRCT accepts no liability for inaccuracies or misstatements about products by manufacturers or other third parties. This does not affect your statutory rights. This item is in the category "Vehicle Parts & Accessories\Motorcycle & Scooter Parts & Accessories\Other Motorcycle & Scooter Parts & Accessories".dirct" and is located in this country: GB. This item can be shipped to United Kingdom.